0.00 $
0

Samples are available now!

11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

Features

 Quad-core ARM 64bit A53@1.8GHz Processor

 1GB DDRL3L System Memory

 8MB NOR Flash, 256MB NAND Flash

 Supports Dynamic Frequency Selection (DFS)

 2x2On-board2.4GHz radio,upto 573Mbps physical Data Rate

 2x2On-board 5GHz radio,upto 1201Mbps physical Data Rate

Support: QCN9074 WiFi 6E Card in M.2 slot

(can not support LTE 5G modules)

Product Description

DR6018-S based on IPQ6010 chipset is an enterprise wireless module integrated with 2×2 5G high power Radio module and 2×2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment. Passive POE 24-48V supported, DC jack 24-48V. If you need 802.3af/bt active POE support , then please order DR6018-S HV version.

Compact “DR6018-S” router board that runs Linux on a Qualcomm IPQ6010 with 802.11ax (Wi-Fi 6) and an M.2 slot plus dual GbE ports, including one with active or passive PoE, and optional micro-SD, GPS, and USB 3.0.

This board has followed up on its 5-port DR6018 v3 router board with a smaller DR-6018-S board with the same Qualcomm-Atheros IPQ6010 SoC with 802.11a/n/ac/ax (Wi-Fi 6), but with only 2x GbE ports. The 125 x 105 x 20mm DR-6018-S features 802.3bt-compliant, active and passive, 24-48V Power-over-Ethernet on one of the ports. By comparison, the DR6018 v3 offers a single passive PoE port along with 3x standard GbE and a 2.5GbE port.

The up to 1.8GHz, quad-core, Cortex-A53 IPQ6010, which has also appeared on 8devices’ Mango module and DVK, features built-in support for dual-band MU-MIMO, 2.4GHz/5GHz 802.11ax. Wi-Fi 6 is faster than 802.11ac (Wi-Fi 5) and supports concurrency for simultaneous WiFi connections to multiple devices. Wally’s does not list the OS, but has previously informed us its Qualcomm boards run Linux.

Although not listed in the specs, the detail view suggests you can optionally choose to remove the 2.4GHz radio and use only the 5GHz connection. In addition to the built-in 802.11ax, there is an M.2 E-key slot for adding a Qualcomm QCN9074 802.11ax module. Four x U.FL antenna connectors are included along with a Bluetooth 4.2 radio and optional GPS.

The DR6018-S ships with 256MB to 1GB DDR3L RAM via dual sockets plus 8MB NOR and 256MB NAND flash. A micro-SD and USB 3.0 port are optional. An FFC/FPC connector provides an LCD display output and there is a 12-pin serial interface.

In addition to the PoE port, a DC jack operates at the same 24-48V range. The board has a -40 to 70°C operating range with 5-95% non-condensing humidity resistance. The DR6018-S supports an EasyMeshHotel Wireless application.

Applications

 802.11ax MU-MIMO OFDMA Access Point  MeshroutersupportingEasyMeshHotel Wireless application  Smart AP TWT

 

 

 

Absolute Maximum Rating

 

 

 

Parameter Rating Unit
Supply Voltage 24V~48V(DC Jack) V
Operating Temperature Range -40 to +70 ºC
Storage Temperature Range -45 to +105 ºC
Operating Humidity Range 5 to +95 (non-condensing) %

 

 

 

 Hardware Specifications

 

 

 

Symbol Parameter
CPU Qualcomm-Atheros IPQ6010
CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor
System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design
Ethernet Port 1 x 1Gbps Ethernet Ports & POE 1x 1Gbps Ethernet Ports
NGFF Slot M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0(For WiFi Module)
SD Card Slot 1x SD Card Slot(Option)
USB /header 1x USB 3.0 Port(Option)
POE LV Version : 24V~48V passive POE  /   HV version  : Active POE(Suport 802.3bt)
DC Jack 24V~48V power supply
LED header FFC/FPC Connector
Serial Port 1x Serial Port 12 Pin Connector
Wireless On-board 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain

On-board 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain

4 x MMCX Connectors

Bluetooth CSR8811 BLE 4.2
Nor Flash 8MB
Nand Flash 256MB
DDR 256MB~512MB
Dimension 125mm x 105mm x 20mm

 

 

 

Radio TX Specifications(5180MHz-5825MHz)

 

 

 

Operating Mode Data Rate Power Tolerance
1 Chain 2 Chains
5Ghz 802.11ax HE20 MCS0 20dBm 23dbm ±2dB
MCS1 20dBm 23dBm ±2dB
MCS2 20dBm 23dBm ±2dB
MCS3 20dBm 23dBm ±2dB
MCS4 19dBm 22dBm ±2dB
MCS5 18dBm 21dBm ±2dB
MCS6 17dBm 20dBm ±2dB
MCS7 16dBm 19dBm ±2dB
MCS8 15dBm 18dBm ±2dB
MCS9 14dBm 17dBm ±2dB
MCS10 13dBm 16dBm ±2dB
MCS11 13dBm 16dbm ±2dB
5Ghz 802.11ax HE400 MCS0 20dBm 23dbm ±2dB
MCS1 20dBm 23dBm ±2dB
MCS2 20dBm 23dBm ±2dB
MCS3 20dBm 23dBm ±2dB
MCS4 19dBm 22dBm ±2dB
MCS5 18dBm 21dBm ±2dB
MCS6 17dBm 20dBm ±2dB
MCS7 16dBm 19dBm ±2dB
MCS8 15dBm 18dBm ±2dB
MCS9 14dBm 17dBm ±2dB
MCS10 13dBm 16dBm ±2dB
MCS11 13dBm 16dbm ±2dB
5Ghz 802.11ax HE80 MCS0 20dBm 23dbm ±2dB
MCS1 20dBm 23dBm ±2dB
MCS2 20dBm 23dBm ±2dB
MCS3 20dBm 23dBm ±2dB
MCS4 19dBm 22dBm ±2dB
MCS5 18dBm 21dBm ±2dB
MCS6 17dBm 20dBm ±2dB
MCS7 16dBm 19dBm ±2dB
MCS8 15dBm 18dBm ±2dB
MCS9 14dBm 17dBm ±2dB
MCS10 13dBm 16dBm ±2dB
MCS11 13dBm 16dbm ±2dB

 

 

 

 Radio TX Specifications(2412MHz-2482MHz)

 

 

 

Operating Mode Data Rate Power Tolerance
1 Chain 2 Chains
2.4Ghz 802.11ax HE20 MCS0 23dbm 26dbm ±2dB
MCS1 23dBm 26dBm ±2dB
MCS2 23dBm 26dBm ±2dB
MCS3 23dBm 26dBm ±2dB
MCS4 23dBm 26dBm ±2dB
MCS5 23dBm 26dBm ±2dB
MCS6 23dBm 26dBm ±2dB
MCS7 22dBm 25dBm ±2dB
MCS8 21dBm 24dBm ±2dB
MCS9 21dBm 24dBm ±2dB
MCS10 18dBm 21dBm ±2dB
MCS11 17dbm 20dbm ±2dB
2.4Ghz 802.11ax HE40 MCS0 23dbm 26dbm ±2dB
MCS1 23dBm 26dBm ±2dB
MCS2 23dBm 26dBm ±2dB
MCS3 23dBm 26dBm ±2dB
MCS4 23dBm 26dBm ±2dB
MCS5 23dBm 26dBm ±2dB
MCS6 23dBm 26dBm ±2dB
MCS7 22dBm 25dBm ±2dB
MCS8 21dBm 24dBm ±2dB
MCS9 21dBm 24dBm ±2dB
MCS10 21dBm 24dBm ±2dB
MCS11 19dbm 22dbm ±2dB

 

 

 

GPIO Pin Mapping

 

 

 

GPIO Pin Mapping
Pin Signal Pin Signal
GPIO_0 AUDIO_MUTE_BUT GPIO_1 QPIC_BUSY_N
GPIO_2 MIC_VOL_M GPIO_3 QPIC_WE_N
GPIO_4 QPIC_RE_N GPIO_5 QPIC_DAT4
GPIO_6 QPIC_DAT5 GPIO_7 QPIC_DAT6
GPIO_8 QPIC_DAT7 GPIO_9 WPS
GPIO_10 QPIC_CLE_N GPIO_11 QPIC_NAND_CE_N
GPIO_12 QPIC_DAT1 GPIO_13 QPIC_DAT2
GPIO_14 QPIC_DAT3 GPIO_15 QPIC_DAT0
GPIO_16 MIC_KPD_PWR_N GPIO_17 QPIC_ALE
GPIO_18 KYPD_HOME_N GPIO_19 GND
GPIO_20 Boot_Config(PULL_DOWN) GPIO_21 MUTE_ON
GPIO_22 ADC_RST GPIO_23 WSA_SWR_CLK
GPIO_24 WSA_SWR_DATA GPIO_25 PWM_LED_RST
GPIO_26 Boot_Config(PULL_DOWN) GPIO_27 WSA_EN_R
GPIO_28 WSA_EN_L GPIO_29 PDM_CLK0
GPIO_30 PDM_DATA0 GPIO_31 PDM_CLK1
GPIO_32 PDM_DATA1 GPIO_33 EXT_MCLK2_ADC
GPIO_34 MIC_VOL_P GPIO_35 LED_5G
GPIO_36 PCIE0_WAKE GPIO_37 LED_2GS
GPIO_38 SPI0_CLK GPIO_39 SPI0_CS_NI
GPIO_40 SPI0_MISO GPIO_41 SPI0_MOSI
GPIO_42 BLSP2_SCL GPIO_43 BLSP2_SDA
GPIO_44 BLSP2_UART_RX GPIO_45 BLSP2_UART_TX
GPIO_46 BLSP5_SCL GPIO_47 BLSP5_SDA
GPIO_48 NC GPIO_49 Boot_Config(PULL_DOWN)
GPIO_50 LED_USB0 GPIO_51 BT_PRIORITY_PTA11
GPIO_52 WLA_ACTI_PTA12 GPIO_53 BT_ACT_PTA10
GPIO_54 Boot_Config(PULL_DOWN) GPIO_55 NC
GPIO_56 NC GPIO_57 NC
GPIO_58 NC GPIO_59 PCIE0_CLK_REQ
GPIO_60 PCIE0_RSTn GPIO_61 NC
GPIO_62 SD_DET GPIO_63 SD_WP
GPIO_64 MDC GPIO_65 MDIO
GPIO_66 SD_LDO_EN GPIO_67 NC
GPIO_68 NC GPIO_69 SPI_CLK_UART_RTSn
GPIO_70 SPI_CS_UART_CTSn GPIO_71 SPI_MISO_UART_RX
GPIO_72 SPI_MOSI_UART_TX GPIO_73 USB_OTG
GPIO_74 NC GPIO_75 Malibu_RESET
GPIO_76 NAPA_INT0 GPIO_77 NAPA_RESET
GPIO_78 QTZ_INT GPIO_79 QTZ_RESET

 

 

 

Boot Config Switch

 

 

 

Boot_Config Switch1(S7)
Boot_Config Boot up Interface Select
S7A S7B S7C
0 0 0 SPI NOR. (Default)
0 0 1 eMMC
0 1 0 QPIC, Parallel NAND
0 1 1 USB3.0
1 0 0 SPI-NOR-GPT
S7D Boot up Interface Select
0
Boot from code ram.(Default)
1
Boot from ROM
Boot_Config Switch2(S9)
Boot_Config Boot up Interface Select
0
No auth.(Default)
1
Auth is required

 

 

 

Interface MAP

 

 

 

 

 

image.png

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop