0.00 $
0

AW7916-NPD IS A WIFI6E 3000 HIGHLY ADVANCED MINI PCIE MODULE WITH G-BAND 2T2R + A-BAND 3T3R 2SS DUAL BANDS DUAL CONCURRENTS (DBDC) BASED ON MEDIATEK MT7916AN AND MT7976 CHIP.

The capabilities enabling up to 3Gbps performance, supports 3×3 with 2 Spatial Streams for either 5 or 6GHz at maximum 160MHz bandwidth and 2×2 with 2 spatial streams for 2.4GHz at maximum 40MHz bandwidth. The additional 3rd antenna can be used for zero-wait DFS and/or MRC (up to 1024-QAM) for extra downlink (Rx) performance. Integrating the FEM radio into the Mediatek Filogic 630 platform yields integration advantages of smaller size and lower BOM costs for device makers.Advanced access point features include up to 24 users (OFDMA), support of MU-MIMO clients, 512 MAC entries, 16 MBSSID and support for all Wi-Fi Alliance Wi-Fi 6 Release 2 features.In addition, the chipset includes hardware-based Wi-Fi offload engine to alleviate the router AP from Wi-Fi connection-related processing, improving whole platform energy efficiency and performance. Filogic 630 can also be combined with Filogic 830 SoC platform for Tri-band Wi-Fi 6/6E solutions for Routers and Repeaters.

AW7916-NPD Block Diagram:

MT7916 NPD module block diagram

FEATURES:

  • IEEE 802.11 a/b/g/n/ac/ax compliant
  • Support 20/40MHz bandwidth in G-band, and 20/40/80/160MHz bandwidth in A-band
  • G-band 2T2R + A-band 3T3R 2ss, dual-band dual concurrent (DBDC) with PHY rate up to 3000Mbps
  • Support MU-MIMO TX/RX
  • Support MU-OFDMA TX/RX
  • Support STBC, LDPC, TX Beamformer and RX Beamformer
  • Support greenfield, mixed mode, legacy modes
  • Security support for WFA WPA/WPA2/WPA3 personal, WPS2.0
  • QoS support of WFA WMM, WMM PS
  • 32-bit RISC MCU for Wi-Fi protocols and Wi-Fi offload
  • Embedded SRAM/ROM
  • UART interface with hardware flow control
  • Programmable and multiplexed GPIO pins
  • PCIe device fully compliant to PCIe v2.1 specification
  • Integrate 4Kbit efuse to store device specific information and calibration data
  • CE and FCC certified !

SPECIFICATION:

Standards Wireless: G-band 2T2R + A-band 3T3R 2ss, dual-band dual concurrent (DBDC) with PHY rate up to 3000Mbps
Data Rate IEEE 802.11ax 3000Mbps@TX/RX
Output Power 11b: 23dbm+/- 1.5dbm @ 11Mbps
11g: 21dbm+/- 1.5dbm @ 54Mbps
11g/n: 21dBm +/- 1.5dbm @MCS7,HE20,16.5dBm@MCS7,HE4011a: 20dBm +/- 1.5dbm @ 54Mbps
11a/n: 20dBm+/- 1.5dbm @MCS7,HE20,16.5dBm@MCS7,HE4011ac HE20: 20+/-1.5dBm@MCS8
11ac HE40: 17+/-1.5dBm@MCS9
11ac HE80: 14.5+/-1.5dBm@MCS911ax HE20: 20+/-1.5dBm@MCS911ax HE40: 17+/-1.5dBm@MCS911ax HE80: 13.5+/-1.5dBm@MCS1111ax HE160: 13.5+/-1.5dBm@MCS11
Receiver Sensitivity 11b: -99dBm@11Mbps
11g: -95dBm@54Mbps
11g/n: -90dBm@HT20,MCS7, -86dBm@HT40,MCS7
11a: -90Bm@54Mbps
11a/n: -85dBm@HT20,MCS7, -81dBm@HT40,MCS711ac: -90dBm+/-2dBm @VHT20 MCS8
11ac: -85dBm+/-2dBm @VHT40 MCS9
11ac: -68dBm+/-2dBm @VHT80 MCS911ax: -61dBm+/-2dBm @HE20 MCS11
11ax: -58dBm+/-2dBm @HE40 MCS11
11ax: -55dBm+/-2dBm @HE80 MCS11
Antenna External Antenna connector (IPEX) x2
Frequency Range US, Canada 2.412GHz~2.462 GHz (CH1~CH11)
EU, Japan: 2.412GHz~2.472GHz (CH1~CH13)5.15GHz ~5.875GHz
Software Security: 64/128-bit WEP Encryption, WPA, WPA2
Driver: Linux
Operating Voltage DC 3.3V ± 5%
Temperature Operating: 0°C ~ +70°C
Storage : -20°C ~ +90°C
Humidity Operating Humidity: 10%~90% non-condensing

Storage Humidity: 10%~90% non-condensing

Dimension 50.95(H) x 30(W)mm

 

Power consumption maximum is 8W, average is 5W.
Main board Power Supply design please provide 3.3V 3.5A, minimum 3.3V 3A.

OpenWRT GITHUB : https://github.com/openwrt/mt76/tree/master/mt7915

It is the same driver in github mt76 inside – the same in MT7915 directory.

OpenWRT porting guide example – read here

Weight 0.1 kg
Dimensions 5 × 4 × 0.5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop