0.00 $
0

5G WWAN Card To RJ45 Adapter With SIM Slot

Product Model: 5G M.2 TO RJ45-KIT mini rev 2.0 .  Lead time is 1-2 weeks, available for orders and tested well with Quectel RM50x modules ! R13 module firmware recommended.

The product is compact, plug and play, no need to install drivers. just plug in the pre-configured 5G module + 5G antenna + 5G SIM card, connect the network cable to use the 5G network, stable performance, fast and convenient use.

The product used wide 5 to 28V Operating Input Range DC-DC, Can adapt to customer different power supply range of products. The DC-DC Up to 3A output current, effectively ensure the stability of the product work.
The product size is small, easy to use, and after the customer installed integration.It can help customers to realize machine networking, state monitoring, remote equipment maintenance and other application requirements. It is suitable for intelligent factory, robot, video surveillance, intelligent power, electronic sentry and other fields.

User can use the TYPE-C to USB line to connect the board and computer. Then user can use AT Commands in the QCOM tool to manage the module. It is not a router, just adapter, but user can do ttl and change imei and other tune-up in the 5G module by AT command. Please take note that Quectel modules do not support TTL nor IMEI change by any AT command.

1. push the sim into the SIM CARD SOCKETS
2. Insert the 5G module into the seat of M.2 and lock the screws
3. Connect 5G antennas (not included in)
4. Connect the DC power supply.And use network cable to connect customer
equipment with the product. (DC and cable not included in)
5. Attention:Sometimes you may need set the APN through the USB DEBUG port

And here is the guideline example for the first use of the module on the adapter:
RM502QAE , RM500Q and RM520N-GL Configure 5G-RJ45 mini
1. AT+QCFG=”data_interface”,1,0 //open pcie net (reboot to take effect)
2, AT+QCFG=”pcie/mode”,1 //enable RC mode (reboot effective)
3, AT+QETH=”eth_driver”, “r8125” //select rtl8125 driver (reboot effective)
4, AT+QMAPWAC=1 //enable mobile AP auto dial (reboot effective)
Modules from other manufacturers can use a little bit different AT commands. This example is base don Quectel AT commands.
 

Weight 0.5 kg
Dimensions 13 × 10 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop