MTK7621 5G NR 4G Dual SIM dual modules LTE-A & WiFi ROUTER, 4x LAN 1x WAN, 12x antena 1x M.2 USB3, 2x MiniPCIe, H721 V7 WiFi 11n 2,4GHz, metal case, high performance, OpenWRT

The Wodaplug ® H721 Dual SIM 5G 5GNR 4G LTE-A dual modules Failover redundancy & Load balance router MTK7621 board HW version 7 with switch to support Sierra Wireless EM919x and EM7690 modems, 4x LAN 1xWAN, 12 antenna ports, standalone: 1xM.2 USB3, 3xMiniPCIe, H721v5G can support 11ac WiFi (11ac 600VX or 900VX module ready, 11ac wave 2 QCA 9984, 9886 modules supported in new firmware). New version 7 comes with 2.4G wifi module (Transytem TWL-2301H TWL-103  – Based on Atheros AR9590 3×3 MIMO Platform).

The H721 v5G Dual sim 5G LTE router with 4 standalone modules slots has been a great choice for custom builds and applications.  The router board’s (PCB) built in 1x M.2 slot for LTE modem and 2x SIM Card slots, makes it a great fit for our line of Sierra Wireless  Quectel M.2 modems. Also have 3 x Minipcie slots, 1 x for aditional modem (it is our M.2 B-Key adapter compatible) and 2 x more for your old standard modem (save your investment) or new one smoking gun in wifi world like 600vx / 900vx QCA9880 miniPCIe modules..

Our new inventory of H721 v5G routers were special ordered to better accommodate our customer’s needs. New improved 5G ready version 7! Once again, if you want to have all info about ETA, versions,etc pls check our facebook page for news !

THE H721 V5G VERSION 7 NOW INCLUDES:

• 4 x MHH4 pigtails for LTE modules pre-installed (4G or 5G LTE Antennas please order separately – we recommend Pulse Larsen W5095X)
• 2,4GHz WiFi 802.11n miniPCIe module (Transytem TWL-2301H TWL-103 – Based on Atheros AR9590 3×3 MIMO Platform ) – you can install second wifi module for dual radio application
• 3 x WiFi  Antennas + 3 x U.FL to SMA Bulkhead Antenna Connector Pigtails (pre-installed).
• 12 Volt 2Amp Power Adapter
• 6 x Screws, Spacers/Nuts to mount M.2 LTE modem
• Wall mounts, screws and lags
• Cat5e Ethernet Cable
• THIS ROUTER IS NOT EQUIPED WITH GSM / LTE modules, please order them separately based on your needs. For WiFi you can also use 524WiFi 600/900vx modules, for GSM/LTE you can use Quectel or Sierra modules including latest 5G CAT20, CAT16, CAT12 modules and also new 5G modules Quectel RM500Q , RM502Q, RM510Q, RM520N and Sierra wireless EM919x EM7690 in USB 3.0 mode. 
• Supports 5GNR 5G modules Quectel, Sierra Wireles, Thales, SIMCom & LTE CAT 3, 4, 6, 12, 16 and 20 LTE modules – it has fully support CAT12 or CAT16 Quectel latest LTE modem. EM16-G, EM20-G and EM12-G.
• it has all modules slots standalone (not shared !!!) 3 x MiniPCIE & 1 x M.2 (usb 3.0 protocol) interface Max 5000Gbps throughput.
• Tuned FirmWare from 5G LTE HW experts – We have customer test EM12 and EM20 in ATT, T-mobile and Sprint in US and many others, all work great
• H721 does not support mmWave function !

HARDWARE: MTK7621A BOARD VERSION 7 – FLASH16M / RAM256M(CPU CORES:2 ;CPU MHZ:880)

1x M.2 (NGFF key B) slot USB3.0 support  5 Gbit/s  bandwidth (5GNR for 5G network and UTMC GMS 3G 4G LTE etc.)

1x MiniPCIE (UTMC GMS 3G 4G LTE ) slot USB2.0 support 480Mbit/s

1x Minipcie slot for primary WIFI (support 3.3V and 5V wifi card)

1x Minipcie slot for secondary WIFI (only support 3.3V wifi card), this slot can be shared as Usb2.0 modem slot.

4 x lan+1 x wan 10/100M/1000M RJ45 port

1 x TF card slot

14 x led for display more information.
12 x antenna hole for future use total

H721 v5G support DC 12-24V

 + SIM slot ESD protection. Independence Power regulator  for LTE and WIFI slot ,Industrial voltage regulator wide range input 5V ~ 27V, Solid capacitor be adopted. Metal case for heat conduction.

DETACHABLE WIRELESS (WI-FI) OVERVIEW – 802.11AC/N QCA9880 600/900 VX MODULE RECOMMENDED 

H721 Router provider 2 x Mini PCIE interface  for wifi, The current Router firmware has preloaded 9K and 10K wifi driver, support all Qualcomm AR and QCA series Mini PCIE wifi card (do not support any wifi card mixed with bluetooth)

We have tested following wifi card already : AR9280 AR9287 AR9382, QCA9880 QCA9882

New firmware support Ath10k 802.11AC Wave2, about 20% improvement at Wifi 5.8G support QCA9984 QCA9886 QCA9888

SOFTWARE: 

We use ROOTer (https://www.ofmodemsandmen.com/) firmware. Daiyman Has made firmware for this board.
support most ROOTer function, support most LTE modem drivers(sierra wireless,Quectel,Huawei,ZTE,Meig)

We have tested:  Quectel RM500Q RM502Q RM505Q RM510Q RM520N EC25E EC25A EC20 EM06 EM12

sierra wireless EM(MC)7355 EM(MC)7455 EM7430 EM7565 EM7511 EM919x EM769x , MeiG SLM750 (TA) , ZTE ME3760 ME3860

H721 does not support mmWave function !

Add 9K and 10K drivers for all QCA and AR wifi card router has pre-flashed BREED (https://www.breed.hackpascal.net) and latest ROOTer firmware

Source code and firmware download address: http://wifi5.eu/dls/wodaplug.com/LTE-routers/H721/

You can use this link to commit your own firmware – https://github.com/openwrt/openwrt/pull/5076/files

SPECIAL FEATURES:

For dual-modem and dual-sim, you need custom fprofile , bounding modem id imei ,imsi or other. you can refer to this link :https://www.ofmodemsandmen.com/modemconfig.html

New firmware can support load balance and fail over redundandcy – you can reference this topic :https://www.ofmodemsandmen.com/loadbalancing.html

  SPECIFICATIONS

Default WiFi passwords – for older firmare version it was “12345678” , new Rooter firmware version use “rooter2017” as default WiFi password.