0.00 $
0

SAMPLES AVAILABLE – ORDER NOW ! OPENWIFI AND OPENWRT SUPPORTED.

QCN9074-6E WITH DR6018 PLATFORM: ACHIEVING 1.5GBPS SPEED IN THROUGHPUT TEST!

11AX MU-MIMO OFDMA DUAL BAND DUAL CONCURRENT EMBEDDED BOARD

  • Qualcomm Atheros IPQ6010 Quad-core ARM 64 bit A53 1.8GHz processor
  • 1GB (2x 512MB), DDR L3L 16-bit interface with 32-bit memory bus design
  • 256MB NAND Flash
  • 32MB NOR Flash
  • M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
  • Supports Dynamic Frequency Selection (DFS)
  • 2×2 On-board 2.4GHz radio, up to 573Mbps physical data rate
  • 2×2 On-board 5GHz radio, up to 1201Mbps physical data rate
  • 1x 2.5Gbps Ethernet port
  • 5x 1Gbps Ethernet ports
  • 1x USB 2.0 Port
  • Support: QUECTEL RM500Q modules and support QCN9074 WiFi 6E Card

APPLICATIONS

• 802.11ax MU-MIMO OFDMA Access Point    • Mesh router supporting EasyMesh      • Smart AP TWT  • Can support OpenWIFI firmware

This board is QCA reference design derived from CP01 and is running QCA reference firmware. This board is for Developpers to developp SW.

The DR6018 V4 is reference board cp01-c4. The only remind is to be care of updating firmware –  not to  make board block, just flash apps not uboot. The board bootstrap is norplusnand. The installed openwrt is done by Qualcomm. The procedure they do is download the older openwrt and change kernel version, and develop their own driver include ethernet, WiFi, etc

 

SPECIFICATIONS TABLE

 

On board radio – 2 radios

Wireless On-board 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain

On-board 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain

4x U.FL Connectors

2.4GHz Data Rate 2×2 MU-MIMO OFDMA Technology, up to 573Mbps

5GHz Data Rate 2×2 MU-MIMO OFDMA Technology, up to 1201Mbps

 

Symbol Parameter
CPU Qualcomm-Atheros IPQ6010
CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor
System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design
Ethernet Port 1 x 1Gbps Ethernet Ports & POE3 x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port
NGFF Slot M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0
SD Card Slot 1x SD Card Slot
USB /header 1x USB 2.0 Port
POE 24V~48V passive POE/Active POE(Suport 802.3bt)
DC Jack 24V power supply
LED header FFC/FPC Connector
Serial Port 1x Serial Port 4 Pin Connector
Wireless On-board 2×2 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 23dBm per chain

On-board 2×2 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 20dBm per chain

4 x MMCX Connectors

Bluetooth CSR8811 BLE 4.2
Nor Flash 32MB
Nand Flash 256MB
DDR 256MB~512MB
Dimension 185mm x 116mm

 

 

Connectors / Ports: 

LED header FFC/FPC Connector

USB /header 1x USB 2.0 Port, 1x USB 3.0 Type-C Port

Serial Port 1x Serial Port,  12 Pin Connector JTAG Debug Interface 1x JTAG 20 Pin Connector

 

Radio TX Specifications(5180MHz-5825MHz)

 

Operating Mode Data Rate Power Tolerance
1 Chain 2 Chains
5Ghz 802.11ax HE20 MCS0 20dBm 23dbm ±2dB
MCS1 20dBm 23dBm ±2dB
MCS2 20dBm 23dBm ±2dB
MCS3 20dBm 23dBm ±2dB
MCS4 19dBm 22dBm ±2dB
MCS5 18dBm 21dBm ±2dB
MCS6 17dBm 20dBm ±2dB
MCS7 16dBm 19dBm ±2dB
MCS8 15dBm 18dBm ±2dB
MCS9 14dBm 17dBm ±2dB
MCS10 13dBm 16dBm ±2dB
MCS11 13dBm 16dbm ±2dB
5Ghz 802.11ax HE400 MCS0 20dBm 23dbm ±2dB
MCS1 20dBm 23dBm ±2dB
MCS2 20dBm 23dBm ±2dB
MCS3 20dBm 23dBm ±2dB
MCS4 19dBm 22dBm ±2dB
MCS5 18dBm 21dBm ±2dB
MCS6 17dBm 20dBm ±2dB
MCS7 16dBm 19dBm ±2dB
MCS8 15dBm 18dBm ±2dB
MCS9 14dBm 17dBm ±2dB
MCS10 13dBm 16dBm ±2dB
MCS11 13dBm 16dbm ±2dB
5Ghz 802.11ax HE80 MCS0 20dBm 23dbm ±2dB
MCS1 20dBm 23dBm ±2dB
MCS2 20dBm 23dBm ±2dB
MCS3 20dBm 23dBm ±2dB
MCS4 19dBm 22dBm ±2dB
MCS5 18dBm 21dBm ±2dB
MCS6 17dBm 20dBm ±2dB
MCS7 16dBm 19dBm ±2dB
MCS8 15dBm 18dBm ±2dB
MCS9 14dBm 17dBm ±2dB
MCS10 13dBm 16dBm ±2dB
MCS11 13dBm 16dbm ±2dB

 

 Radio TX Specifications(2412MHz-2482MHz)

 

Operating Mode Data Rate Power Tolerance
1 Chain 2 Chains
2.4Ghz 802.11ax HE20 MCS0 23dbm 26dbm ±2dB
MCS1 23dBm 26dBm ±2dB
MCS2 23dBm 26dBm ±2dB
MCS3 23dBm 26dBm ±2dB
MCS4 23dBm 26dBm ±2dB
MCS5 23dBm 26dBm ±2dB
MCS6 23dBm 26dBm ±2dB
MCS7 22dBm 25dBm ±2dB
MCS8 21dBm 24dBm ±2dB
MCS9 21dBm 24dBm ±2dB
MCS10 18dBm 21dBm ±2dB
MCS11 17dbm 20dbm ±2dB
2.4Ghz 802.11ax HE40 MCS0 23dbm 26dbm ±2dB
MCS1 23dBm 26dBm ±2dB
MCS2 23dBm 26dBm ±2dB
MCS3 23dBm 26dBm ±2dB
MCS4 23dBm 26dBm ±2dB
MCS5 23dBm 26dBm ±2dB
MCS6 23dBm 26dBm ±2dB
MCS7 22dBm 25dBm ±2dB
MCS8 21dBm 24dBm ±2dB
MCS9 21dBm 24dBm ±2dB
MCS10 21dBm 24dBm ±2dB
MCS11 19dbm 22dbm ±2dB

 

GPIO Pin Mapping

 

GPIO Pin Mapping
Pin Signal Pin Signal
GPIO_0 AUDIO_MUTE_BUT GPIO_1 QPIC_BUSY_N
GPIO_2 MIC_VOL_M GPIO_3 QPIC_WE_N
GPIO_4 QPIC_RE_N GPIO_5 QPIC_DAT4
GPIO_6 QPIC_DAT5 GPIO_7 QPIC_DAT6
GPIO_8 QPIC_DAT7 GPIO_9 WPS
GPIO_10 QPIC_CLE_N GPIO_11 QPIC_NAND_CE_N
GPIO_12 QPIC_DAT1 GPIO_13 QPIC_DAT2
GPIO_14 QPIC_DAT3 GPIO_15 QPIC_DAT0
GPIO_16 MIC_KPD_PWR_N GPIO_17 QPIC_ALE
GPIO_18 KYPD_HOME_N GPIO_19 GND
GPIO_20 Boot_Config(PULL_DOWN) GPIO_21 MUTE_ON
GPIO_22 ADC_RST GPIO_23 WSA_SWR_CLK
GPIO_24 WSA_SWR_DATA GPIO_25 PWM_LED_RST
GPIO_26 Boot_Config(PULL_DOWN) GPIO_27 WSA_EN_R
GPIO_28 WSA_EN_L GPIO_29 PDM_CLK0
GPIO_30 PDM_DATA0 GPIO_31 PDM_CLK1
GPIO_32 PDM_DATA1 GPIO_33 EXT_MCLK2_ADC
GPIO_34 MIC_VOL_P GPIO_35 LED_5G
GPIO_36 PCIE0_WAKE GPIO_37 LED_2GS
GPIO_38 SPI0_CLK GPIO_39 SPI0_CS_NI
GPIO_40 SPI0_MISO GPIO_41 SPI0_MOSI
GPIO_42 BLSP2_SCL GPIO_43 BLSP2_SDA
GPIO_44 BLSP2_UART_RX GPIO_45 BLSP2_UART_TX
GPIO_46 BLSP5_SCL GPIO_47 BLSP5_SDA
GPIO_48 NC GPIO_49 Boot_Config(PULL_DOWN)
GPIO_50 LED_USB0 GPIO_51 BT_PRIORITY_PTA11
GPIO_52 WLA_ACTI_PTA12 GPIO_53 BT_ACT_PTA10
GPIO_54 Boot_Config(PULL_DOWN) GPIO_55 NC
GPIO_56 NC GPIO_57 NC
GPIO_58 NC GPIO_59 PCIE0_CLK_REQ
GPIO_60 PCIE0_RSTn GPIO_61 NC
GPIO_62 SD_DET GPIO_63 SD_WP
GPIO_64 MDC GPIO_65 MDIO
GPIO_66 SD_LDO_EN GPIO_67 NC
GPIO_68 NC GPIO_69 SPI_CLK_UART_RTSn
GPIO_70 SPI_CS_UART_CTSn GPIO_71 SPI_MISO_UART_RX
GPIO_72 SPI_MOSI_UART_TX GPIO_73 USB_OTG
GPIO_74 NC GPIO_75 Malibu_RESET
GPIO_76 NAPA_INT0 GPIO_77 NAPA_RESET
GPIO_78 QTZ_INT GPIO_79 QTZ_RESET

 

Boot Config Switch

 

Boot_Config Switch1(S7)
Boot_Config Boot up Interface Select
S7A S7B S7C
0 0 0 SPI NOR. (Default)
0 0 1 eMMC
0 1 0 QPIC, Parallel NAND
0 1 1 USB2.0
1 0 0 SPI-NOR-GPT
S7D Boot up Interface Select
0
Boot from code ram.(Default)
1
Boot from ROM
Boot_Config Switch2(S9)
Boot_Config Boot up Interface Select
0
No auth.(Default)
1
Auth is required

 

interface map

Interface MAP 
Weight 0.3 kg
Dimensions 17 × 13 × 2 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop