524WiFi Pulse P5-01 Pro Plus – Wi-Fi 5 2×2 Dual-Band Mini PCIe Radio Module

524WiFi™ Pro Plus — tuned for your wireless deployment

Our Pro Plus radio modules are tuned for their intended wireless applications. Combine the radio architecture specified for this model with the right host, software configuration and antenna system to get the most from your installation. The technical sections below explain the settings, interfaces and configuration details relevant to this product.

524WiFi™ Signal Plus™ — make the most of your RF path

Signal Plus™ brings the antenna, operating band, polarization, connectors and installation together as one RF system. Match the antenna coverage to your application and keep the feed path short and low-loss to preserve useful signal in both directions. This model is part of our tuned product range; use its specified RF connector layout and supported bands when building your Signal Plus™ installation.

Choose matched antennas and cabling through 524WiFi™ and discuss your complete installation with our technical team. Explore our Pro Plus and Signal Plus™ approach.

Where this module fits

Embedded access points and established Linux systems requiring a compact two-stream Wi-Fi 5 radio. The Qualcomm QCA9880 platform and Selectable 2.4 or 5 GHz configuration define the role of this model in your network. Select the radio topology around the intended client population, channel plan and uplink design. A dedicated radio cell can be assigned its own SSID and security policy through the chosen software configuration.

Technical specification

Detailed hardware and RF reference

Electrical, mechanical and interface detail

Parameter	Pulse P5-01
Host interface	Mini PCI Express 1.1
Power integration	3.3 V DC; 5 W maximum
RF allocation	Two U.FL connectors; two spatial streams
Signal processing	Spatial multiplexing, LDPC, STBC, MRC and cyclic-delay diversity
Environmental design	-40 to +70 C operating; -40 to +90 C storage; 5-95% RH non-condensing

RF engineering tables

Model-specific datasheet reference points for RF design. TX is conducted power per RF chain; RX is input sensitivity. Configure channel, output power and antenna gain for the operating country.

5 GHz, 40 MHz, 802.11ac MCS reference

MCS	TX / chain (dBm)
MCS0	18.0
MCS1	18.0
MCS2	18.0
MCS3	17.0
MCS4	17.0
MCS5	16.0
MCS6	15.0
MCS7	15.0
MCS8	14.0
MCS9	14.0

Reference tolerance: ±2 dB.

Open full-size engineering chart

Pulse P5-01 engineering notes: radio, host and real deployment

Radio architecture and application

Embedded access points and established Linux systems requiring a compact two-stream Wi-Fi 5 radio. The Qualcomm QCA9880 platform and Selectable 2.4 or 5 GHz configuration define the role of this model in your network. Select the radio topology around the intended client population, channel plan and uplink design. A dedicated radio cell can be assigned its own SSID and security policy through the chosen software configuration.

Two-stream radio for established embedded hosts

Use this compact two-stream radio in a Mini PCI Express 1.1 host with a 3.3 V supply. Two U.FL antenna connections support the selected 2.4 GHz or 5 GHz operating band. The 30 x 50.9 x 3.2 mm module fits established embedded designs, while its 867 Mb/s theoretical 5 GHz PHY profile supports Wi-Fi 5 access-point applications. Linux integration uses ath10k with firmware and board data matched to the radio.

Theoretical PHY: 867 Mb/s at 5 GHz.

Theoretical PHY reference

Published maximum physical-layer rates by band, in Mb/s. Each bar represents its specified radio profile, channel width and spatial-stream configuration.

5 GHz — 867 Mb/s theoretical PHY

Hardware overview

Linux, OpenWrt, firmware and board data

Pulse P5-01 uses the ath10k driver family for Linux integration. Prepare the PCIe host, driver, device firmware and calibration as one matched software set. For an OpenWrt host, choose packages built for that host release and kernel ABI, then verify the detected device and radio profiles.

Model documentation and data

Pulse P5-01 technical reference and integration guide · Download RF reference data (CSV)

Installation checklist

1. Prepare the host or enclosure, mounting points and management access for the model specified above.
2. Match the power supply and cooling to the complete assembly and the technical configuration.
3. Secure the hardware and connect the appropriate RF paths, Ethernet interfaces and peripherals.
4. Start with the revision-matched software image, then configure the operating country, radio channels and network role.
5. Verify client association and traffic in both directions; retain the working image and deployment record.

Start with the network role: access-point coverage, an embedded gateway or an engineering platform. Plan the Ethernet uplink, client density and management access together. For multiple radio cells, assign channels and antenna positions as part of one installation plan. Keep management access available while bringing up each interface and retain a known working configuration for recovery.

For the hardware installation, use the correct mounting points and provide clearance around the heatsink, connectors and adjacent components. Size the power supply for the complete assembly, including optional radio modules and peripherals. Provide airflow over the active components and route RF cables so their connectors remain free of mechanical strain.

Signal Plus™: antenna and RF-path integration

Signal Plus™ brings the antenna, operating band, polarization, connectors and installation together as one RF system. For Pulse P5-01, start with the Selectable 2.4 or 5 GHz configuration and the RF interfaces in the technical table. Match the coverage pattern to your site and preserve useful signal with short, low-loss cable runs.

Ask our technical team to match antennas and RF accessories to your installation.

Troubleshooting quick path

Deployment testing and acceptance

Use the following commissioning procedure for Pulse P5-01. This is a test method, separate from the theoretical PHY specifications and datasheet RF references above.

FAQ

Where does this model fit in a network?

Install this radio module in a host with the matching connector, electrical interface and power design. Its band and stream configuration defines the wireless cell it adds to your access point or gateway.

How do I choose the software package?

Use the package matched to this model and hardware revision. Share your host and kernel version with technical support so the driver, firmware, board data and installation procedure can be reviewed together.

How should I select antennas?

Match antenna bands and RF connectors to the stated configuration. Select directional or omnidirectional coverage for the installation, preserve the intended MIMO paths and use short, suitably rated pigtails. Include enclosure mounting and cable routing in the RF plan.

What does the PHY figure describe?

It describes the theoretical physical-layer link rate for the specified radio profile. Select the corresponding channel width, spatial streams and compatible client configuration when planning around that figure. Document practical application tests separately with their complete setup.

How do I prepare a repeatable deployment?

Keep a record of the working image, configuration, hardware revision, power supply, antenna configuration and deployment country. Validate radio initialization, client association and sustained traffic in the intended enclosure before rolling the configuration out to additional units.

What should I send for engineering support?

Send the Pulse model code, intended application, host or board revision, software version, antenna arrangement and relevant diagnostic logs. Our technical team can then review the complete installation.

Final model identification and code table