DAKOTA DR4029 BASED ACCESS POINT – WIRELESS MODULE – DUAL BAND 11AC WAVE2 MODULE
FEATURING WITH INDUSTRIAL-GRADE IPQ4019 / IPQ4029 CHIPSET (VERSION 4 WITH IPQ4029 AND NO SFP BASE, BETTER SIM SLOTS)
Integrated with 2x 2 5GHz high power 11ac MU-MIMO wave2 Radio module and 2×2 2.4GHz high power MU-MIMO Radio module
Support 4.940GHz to 5.825GHz Frequency Range
Support 2.400GHz to 2.482GHz
Support 2 x 5GHz MMCX Connectors and 2×2.4GHz MMCX
Support 5MHz/10MHz/20MHz/40MHz/80MHz Bandwidth
Support 11ABGN/AC
RoHS compliance ensure a high level protection of human health and the environment from risks that can be posed by chemicals
Our Firmware supports all the LTE modules of Quectel (EC25, EP06, EM06, EM12, EM16 and the ne G RM500Q-GL module too !
FCC certified, FCC ID is 2AG7VDR4029 (CE certification possible, needs higher volume order and complete device setup)
APPLICATIONS:
EXCITING NEWS: WALLYS WIFI 6 CARD #DR9074E NOW COMPATIBLE WITH DR4019 PLATFORM (WIFI 5) AND OPENWRT DRIVER – A GAME-CHANGER IN WIRELESS TECH!
SECURITY SURVEILLANCE COMMERCIAL RADIO COVERAGE HOTEL WIRELESS APPLICATION COUNTRY COVERAGE FOREST FIRE PROTECTION ENGINEERING SOME SPECIAL SCENE APPLICATION
mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment
PRODUCT DESCRIPTION
DR4029 based on IPQ4029 chipset is an enterprise wireless module integrated with 2×2 5G high power Radio module and 2×2 2.4G high power Radio module designed specifically to provide users with mobile access to high-bandwidth video streaming, voice, and data transmission for office and challenging RF environment in factories, warehouses establishment
The 802.11ac Wave2 radio is supported with 4x MMCX antenna connectors split between 5GHz and 2.4GHz. A mini-PCIe slot with dual SIM slots supports 3G or 4G. Other features include a USB 3.0 port, a 16-pin LED & GPIO header, and a serial interface.
The Dakota DR4029 are further equipped with a DC jack and reset button, and the board is said to consume “48.1V x 0.180A= 8.658W.” As noted, only a -40 to 70°C range is listed. There’s an official QSDK with Linux 3.14 that requires an NDA, as well as an OpenWrt image (GIHub supported).
| Absolute Maximum Rating |
| Parameter | Rating | Unit |
| Supply Voltage | 24V~48 | V |
| Operating Temperature Range | -40 to +70 | ºC |
| Storage Temperature Range | -45 to +105 | ºC |
| Operating Humidity Range | 5 to +95 (non-condensing) | % |
| Storage Humidity Range | 0 to +90 (non-condensing) | % |
| Hardware Specifications |
| Symbol | Parameter |
| CPU | IPQ4029（Quad core ARM Cortex A7 at 716.8 MHz） |
| Antenna Connector | 2 x 5G MMCX connectors;2×2.4G MMCX |
| 10/100/1000Mbps Gigabit Ethernet | 2xRJ45 |
| SFP connector | 1xSFP fiber module connector (optional – not on board by default) |
| 3G/4G connector | 1xminipcie 3G/4G connector support with two sim card |
| USB connector | 1xUSB 3.0 connector |
| POE | 24V~48V passive POE |
| DC Jack | 24V~48V power supply |
| ROHS Compliance | YES |
| Dimension | 115mm x 105mm x 16mm |
| Max Power | 48.1V x 0.180A= 8.658W |
| Nor Flash | 2MB~32MB |
| Nand Flash | 128MB |
| DDR | 256MB~512MB |
| Radio TX Specifications(5180MHz-5825MHz) |
| Operating Mode | Data Rate | Power | Tolerance | |
| 1 Chain | 2 Chains | |||
| 802.11a | 6 Mbps | 27dBm | 30dbm | ±2dB |
| 54 Mbps | 23dBm | 26dbm | ±2dB | |
| 802.11n HT20 | MCS0, MCS8 | 26dBm | 29dbm | ±2dB |
| MCS7, MCS15 | 22dBm | 25dbm | ±2dB | |
| 802.11n HT40 | MCS0, MCS8 | 25dBm | 28dbm | ±2dB |
| MCS7, MCS15 | 21dBm | 24dbm | ±2dB | |
| 802.11ac | MCS0, MCS10,MCS20 | 25dBm | 28dbm | ±2dB |
| MCS9,MCS19,MCS29 | 19dBm | 22dbm | ±2dB | |
| Radio RX Specifications(5180MHz-5825MHz) |
| Operating Mode | Data Rate | Sensitivity |
| 802.11a | 6 Mbps | -96dBm |
| 54 Mbps | -78dBm | |
| 802.11n HT20 | MCS0, MCS8 | -93dBm |
| MCS7, MCS15 | -73dBm | |
| 802.11n HT40 | MCS0, MCS8 | -90dBm |
| MCS7, MCS15 | -70dBm | |
| 802.11AC HT40 | MCS0, MCS10,MCS20 | -90dBm |
| MCS9,MCS19,MCS29 | -67dBm | |
| 802.11AC HT80 | MCS0, MCS10,MCS20 | -88dBm |
| MCS9,MCS19,MCS29 | -62dBm |
| Radio TX Specifications(2412MHz-2482MHz) |
| Operating Mode | Data Rate | Power | Tolerance | |
| 1 Chain | 2 Chains | |||
| 802.11g | 6 Mbps | 27dbm | 30dbm | ±2dB |
| 54 Mbps | 25dbm | 28dbm | ±2dB | |
| 802.11n HT20 | MCS0, MCS8 | 26dbm | 29dbm | ±2dB |
| MCS7, MCS15 | 25dbm | 28dbm | ±2dB | |
| 802.11n HT40 | MCS0, MCS8 | 26dbm | 29dbm | ±2dB |
| MCS7, MCS15 | 24dbm | 27dbm | ±2dB | |
| Radio RX Specifications(2412MHz-2482MHz) |
| Operating Mode | Data Rate | Sensitivity |
| 802.11g | 6 Mbps | -96dBm |
| 54 Mbps | -78dBm | |
| 802.11n HT20 | MCS0, MCS8 | -93dBm |
| MCS7, MCS15 | -73dBm | |
| 802.11n HT40 | MCS0, MCS8 | -90dBm |
| MCS7, MCS15 | -70dBm |
| Interface MAP |
| Version |
| Item | Information | |
| DR40X9-1 |
|
|
| DR40X9-v3 | CPU is IPQ4029 |
| LED & GPIO header |
| Item | Information | Note |
| 1 | PWR LED | |
| 2 | Eth1 LED | |
| 3 | Eth2 LED | |
| 4 | 2.4G LED | GPIO32 |
| 5 | 5G LED | GPIO50 |
| 6 | Strength LED | GPIO36 |
| 7 | Strength LED | GPIO39 |
| 8 | NC | |
| 9 | GND | |
| 10 | Uart1_TX | GPIO8 |
| 11 | Uart1_RX | GPIO9 |
| 12 | NC | |
| 13 | NC | |
| 14 | NC | |
| 15 | GND | |
| 16 | PWR |
| Serial Port |
| Item | Information |
| 1 | PWR |
| 2 | Uart0 TX |
| 3 | Uart0 RX |
| 4 | GND |
| GPIO |
| Item | Information |
| GPIO11 | Control for the switch of SIM cards |
Reviews
There are no reviews yet.