524WiFi 𝑨𝑾7990-𝑵𝑷𝑫: MediTatek Filogic 6 MT7990 𝑾𝒊-𝑭𝒊 7 𝑴𝒊𝒏𝒊 𝑷𝑪𝑰𝒆 𝑴𝒐𝒅𝒖𝒍𝒆

Infrastructure Preservation: Upgrade to 802.11be Without a PCB Redesign

In industrial computing, the lifecycle of your platform is critical. While the industry pivots to Wi-Fi 7, transitioning often necessitates a full-scale hardware overhaul—until the introduction of the 524WiFi AW7990-NPD Mediatek based module.

Technical Core & Strategic Advantages :

• MediaTek Filogic 600 (MT7990) : Delivers BE3600 dual-band concurrent (DBDC) operation.
• 4096-QAM Modulation : Achieves a 20% increase in peak data rates compared to Wi-Fi 6.
• Multi-Link Operation (MLO) : Ensures deterministic latency and link reliability in congested environments.
• Drop-In Upgrade : Bypasses R&D costs and time-to-market delays by utilizing the standard Mini PCIe form factor.

Optimized for Mission-Critical Verticals :

• Industrial Robotics : High-bandwidth telemetry for AMRs/AGVs.
• Edge AI Nodes : Rapid data synchronization for Smart Factory 4.0.
• Security Gateways : High-throughput processing without thermal throttling.

AW7990-NPD: High-Performance Wi-Fi 7 BE3600 AP Module with MediaTek MT7990AN

AW7990-NPD is an Wi-Fi 7 AP module BE3600 by MediaTek MT7990AN chipset supports Wi-Fi 7 technology and feature IEEE802.11 a/ b/ g/ n/ ac/ ax/ be compliant, 2.4GHz 2×2, 5GHz
3×3 2ss BE3600 Wi-Fi subsystem. The MT7990AN offers feature-rich wireless connectivity at high standards and delivers reliable, cost-effective throughput from an extended distance.

The optimized Wi-Fi baseband algorithms provide superb performance. The intelligent MAC design deploys a highly efficient offload engine and hardware data processing accelerators,
which fully offload Wi-Fi task of the host processor. The MT7976CN is designed to support standard-based features in the areas of security, quality of service, and international regulations, giving end users the greatest performance at any time and in any circumstances.

Pre-certified with CE / FCC / IC, this solution helps accelerate product deployment while lowering certification cost and complexity.

Features

WLAN

• Wi-Fi compliant
• IEEE 802.11a, b, g, n, ac, ax, be compliant
• 2.4GHz 20 and 40 MHz, 2×2
• 5GHz: 20, 40, 80 and 160 MHz, 3×3 2ss
• Dual-Band Dual Concurrent (DBDC) iFEM
• Supports up to 4096-QAM
• Data rate of up to 688Mbps for 40MHz channel in 2.4Ghz and 2882Mbps for 160MHz in 5GHz mode
• Integrated power detector to support per packet Tx power control
• Multi-user multiple input multiple output (MU-MIMO) for Tx and Rx
• Multi-user Orthogonal Frequency-Division Multiple Access (MU-OFDMA) for Tx and Rx
• Support STBC, LDPC, Tx beamformer and Rx beamformee
• Support greenfield mode, mixed mode, and legacy mode

Platform

• 32bit RISC-V MCU for Wi-Fi protocol and Wi-Fi offload
• Embedded SRAM and ROM
• PCIe3.0 interface

Security

• WFA, WPA, WPA2, WPA3 personal, WPS 2.0

QoS

• WFA WMM and WMM-PS

Standard

Chipset	MT7990AN with MT7976CN
Memory	8M byte
Host Interface	Mini PCIe
Operating Voltage	DC 3.3V ± 5%
Power Consumption	11.5W
Wireless	2.4GHz 2T2R 802.11b/g/n/ac/ax/be5GHz 3T3R 2ss 802.11a/n/ac/ax/be
Frequency Range	2.4GHz: 2.412~2.472GHz5GHz: 5.15~5825GHz
Channel Spectrum Widths	Supports 20/40MHz at 2.4GHzSupports 20/40/80/160MHz at 5GHz
Antenna	External Antenna connector (IPEX) x3
Operating System	Linux
Environmental Temperature	Operating:-10°C to 70°C, Storage:-20°C to 90°C
Environmental Humidity	Operating: 10% to 90%, Storage: Max. 90%
Dimensions (mm)	30(W)*51(L)*5.1(H)mm
Weight	TBD
Certification	TBD

Package with Heatsink 30x40x25mm Aluminum material

Power consumption maximum is 9W, average is 4 – 8W.
Main board Power Supply design please provide 3.3V 3A, minimum 3.3V 2.5A.

Additional information

Weight	0.0255 kg
Dimensions	9.5 × 6.5 × 1.5 cm